Rhino-Rack Vortex Aero Crossbars Roof Rack Kit Installation - 2017 Toyota Tacoma- Video

Hey everybody, Ryan here at etrailer. Today on our 2017 Toyota Tacoma, we're gonna be showing you how to install the Rhino Rack Roof Rack System. But before we get into that, let's just take a couple of minutes, check this out and make sure it's gonna work for you. So this particular system is going to be designed for the Tacomas that have a naked roof or you know no factory rails installed at all. If yours has something like that, be sure to use our fit guide and there's definitely gonna be an option or a solution for you. But with that said, what our neighbor did here today, he was looking for something a little more permanent in terms of having a roof rack. more

Watch Video

8/3/2023 11:08:53 AM

Yakima OverHaul HD Truck Bed Rack Uprights Installation - 2021 Toyota Tacoma- Video

Hi everyone. It's Evangeline here at etrailer.com And today we are looking at our Yakima overhaul HD ladder rack here for tonneau covers on our 2021 Toyota Tacoma. If you have a tonneau cover, or if you want to add a tonneau cover to your vehicle but you also want a ladder rack these are great options because these mount into the T track channels on your tonneau cover. So make sure you have that channel right there so that you can Mount through these ladder racks to it. This works with Pace Edwards, Retracts pro and really any other tonneau cover that has those channels. If you already have a Yakima overhaul HD or an outpost, you can get this adapter kit to adapt your ladder rack to your tonneau cover. more

Watch Video

4/13/2021 2:06:48 PM

Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Installation - 2020 Toyota Tacoma- Video

Evangeline: Hi, it's Evangeline from etrailer.com. And today we are looking at the Yakima overhaul HD on our 2022 Toyota Tacoma. Now what's pretty cool about this truck bed rack is well for one, it looks pretty good on our truck. I love how nice and durable it is as well. When I was installing it, it was surprisingly a lot lighter than it looked, which made it a lot easier to install. And once I got it in there, it's secure. more

Watch Video

9/3/2020 12:32:09 PM

Roadmaster Battery Charge Line Kit Installation - 2018 Toyota Tacoma- Video

Speaker 1: Today on our 2018 Toyota Tacoma, we're gonna be installing Roadmaster's Charge Line Kit, part number RM156-25. This charge line kit is gonna allow your RV to charge the battery on your vehicle while you're pulling it behind it. This way, whenever you get to your destination you don't have to worry about the battery being dead and stuck without being able to go anywhere. It does this using a circuit breakered circuit from your 6 volt connector to your battery. And it's a 15 amps maximum charge and it comes with all the connections and wiring you'll need to get it hooked up. First thing we did was mount our circuit breaker. more

Watch Video

7/13/2018 11:22:13 AM

Trailer Brake Controller Installation - 2012 Toyota Tacoma- Video

All right, today on this 2012 Toyota Tacoma were going to install a brake controller, part number 90885 from Tekonsha. This is a Prodigy P2. To help us install this were also going to use part number 3040-P. This is a cable that will go between the brake controller and the port on the truck. Well start off with this part number. Well go ahead and look for the port underneath the dash on the left hand side by the drivers side door. more

Watch Video

5/20/2013 9:24:12 AM

Trailer Brake Controller Installation - 1999 Toyota Tacoma- Video

Today on this 1999 Toyota Tacoma were going to install part number TK90160. This is the Primus IQ brake controller. To help install this were going to use part number ETBC7. Well start from the back of the truck and work our way forward. Well start off by mounting the ETBC7 bracket to an existing bracket on the vehicle. Well take our gray wire and connect it up to our seven to four pole adapter. more

Watch Video

12/26/2012 12:36:03 PM

Trailer Brake Controller Installation - 2009 Toyota Tacoma- Video

Today on this 2009 Toyota Tacoma we are going to install a brake controller from Tekonsha, this is going to be the Prodigy P3 brake controller part number 90195. We are also going to use the install kit part number ETBC7. The truck has the factory 4-pole already in place so what we are going to have to do is take down the original factory bracket with the 4-pole and then move it out of the way and install the new bracket that comes with the ETBC7 kit. This is the bracket that comes with the ETBC7 kit. It is going to be a tight fit but I think we can sneak it on there using the existing bolt holes. If it is a little bit tight just run a drill bit through there to make the one size a little bit bigger. 00:44 more

Watch Video

1/26/2011 10:33:14 AM

Trailer Brake Controller Installation - 2008 Toyota Tacoma 90185- Video

Today on this 2008 Toyota Tacoma pick up we will be installing Prodigy brake controller part number 90185 and we will also be using the brake control wiring kit part number ETBC7. We are going to start here at the rear of the vehicle and mount our 7-pole first. As you can see our vehicle here already has an existing 4-pole that we are going to be plugging our 7-pole adapter into. So in preparation I want to find a spot to go ahead and mount our 7-pole bracket to. On this Tacoma there is not a whole lot to work with. We typically like to mount it here on the back side of the bumper. Mounting at that angle would be kind of obnoxious. So I am actually going to be using part number 118136 which is a long bracket that will attach to the trailer hitch here with the use of a hose clamp. And then we can just mount our 7-pole bracket on like so. more

Watch Video

10/27/2009 4:20:14 AM

  1